filename: tfs 1680.doc version 1.3 04.02.2014 vectron international filter specification tfs 1680 1/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. measurement condition ambient temperature: 23 c input power level: 0 dbm terminating impedance: * input: 200 || -0.37 pf output: 75 characteristics remark: the nominal frequency f n is fixed at 1680.0 mhz. the insertion loss a e is defined as loss value determined at f n. reference level for the relative attenuation a rel of the tfs 1680 is the insertion loss a e . all specified data are met within the operating tem perature range. d a t a typ. value tolerance / limit insertion loss a e 2.3 db max. 3.0 db (reference level) nominal frequency f n - 1680.0 mhz passband pb - f n 20.0 mhz passband variation 1.4 db max. 2.0 db relative attenuation a rel 0.3 mhz ... 860 mhz 57 db min. 55 db 860 mhz ... 1100 mhz 50 db min. 46 db 1100 mhz ... 1539.7 mhz 45 db min. 43 db 1800 mhz ... 2000 mhz 45 db min. 33 db 2000 mhz ... 2250 mhz 43 db min. 40 db 2250 mhz ... 6000 mhz 31 db min. 15 db group delay ripple 1665 mhz ... 1699 mhz 3 ns max. 15 ns input vswr within pb 2.0 : 1 max. 2.4 : 1 output vswr within pb 2.0 : 1 max. 2.4 : 1 cmrr *** within pb 26 db min. 20 db input power level - max. 0 dbm permissible dc voltage - max. 0 v operable temperature range - - 30 c ... + 80 c operating temperature range otr - - 20 c ... + 50 c storage temperature range - - 50 c ... +125 c temperature coefficient of frequency tc f ** -42 ppm/k *) the terminating impedances depend on parasitics and q-values of matching elements and the board us ed, and are to be understood as reference values only. should there be additio nal questions do not hesitate to ask for an applica tion note or contact our design team. **) ? f(hz) = tc f (ppm/k) x (t-t 0 ) x f cat (mhz) ***) cmrr: common mode rejection ratio generated: checked / approved:
filename: tfs 1680.doc version 1.3 04.02.2014 vectron international filter specification tfs 1680 2/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. filter characteristic construction and pin connection (all dimensions in mm) 200 / 75 test circuit 200 75 l1 saw 4 2 1, 3, 5 6 1 ground 2 output 3 ground 4 input 5 ground 6 input date code: year + week e 2014 f 2015 g 2016 ... 86.2084 404.9668 723.7251 1042.4834 1361.2417 1680 1998.7583 2317.5166 2636.2749 2955.0332 3273.7916 -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 frequency in mhz magnitude in db insertion loss: -2.37 db 1640 1648 1656 1664 1672 1680 1688 1696 1704 1712 1720 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 frequency in mhz magnitude in db 1640 1648 1656 1664 1672 1680 1688 1696 1704 1712 1720 0 3 6 9 frequency in mhz vswr h80 e06
filename: tfs 1680.doc version 1.3 04.02.2014 vectron international filter specification tfs 1680 3/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. stability characteristics, reliability after the following tests the filter shall meet the whole specification: 1. shock: 500g, 1 ms, half sine wave, 3 shocks each plane; din iec 68 t2 - 27 2. vibration: 10 hz to 500 hz, 0.35 mm or g respec tively, 1 octave per min, 10 cycles per plane, 3 planes; din iec 68 t2 - 6 3. change of temperature: -55 c to 125c / 15 min. each / 1 00 cycles din iec 68 part 2 ? 14 test n 4. resistance to solder heat (reflow): reflow possible: three ti mes max.; for temperature conditions, see page 4: "air reflo w temperature conditions" this filter is rohs compliant (2011/65/eu) packing tape & reel: iec 286 ? 3, with exception of value f or n and minimum bending radius; tape type ii, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: 9000 reel of empty components at start: min. 300 mm reel of empty components at start including leader : min. 500 mm trailer: min. 300 mm g do w ct f e g d1 p2 p1 po bo ao pull off direction pin marker typ date code ko t a c n w 1 w 2 the minimum bending radius is 45 mm. tape (all dimensions in mm) w : 8,00 0,3 po : 4,00 0,1 do : 1,50 +0,1/-0 e : 1,75 0,1 f : 3,50 0,05 g(min) : 0,75 p2 : 2,00 0,05 p1 : 4,00 0,1 d1(min) : 1,50 ao : 3,25 0,1 bo : 3,25 0,1 ct : 5,5 0,1 reel (all dimensions in mm) a : 330 w1 : 8,4 +1,5/-0 w2(max) : 14,4 n(min) : 50 c : 13,0 +0,5/-0,2
filename: tfs 1680.doc version 1.3 04.02.2014 vectron international filter specification tfs 1680 4/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. air reflow temperature conditions conditions exposure average ramp-up rate (30c to 217c) less than 3c/ second > 100c between 300 and 600 seconds > 150c between 240 and 500 seconds > 217c between 30 and 150 seconds peak temperature max. 260c time within 5c of actual peak temperature between 10 and 30 seconds cool-down rate (peak to 50c) less than 6c/second time from 30c to peak temperature no greater than 300 seconds temperature / c time / s max. 260 c 217c 10 ... 30 s 30 ... 150 s max. 300 s chip-mount air reflow profile
filename: tfs 1680.doc version 1.3 04.02.2014 vectron international filter specification tfs 1680 5/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. history version reason of changes name date 1.0 - generation of development specification s. channaa 12.09.2008 1.1 - change input power level, add typical values and filter characteristic - generation of filter specification s. channaa 17.12.2008 1.2 - correct construction s. channaa 16.03.2009 1.3 - maximum input power updated kortenbeutel 04.02.2014
|
